Acid and alkali resistance pneumatic diaphragm pump characteristics

Interpretation of acid and alkali resistance pneumatic diaphragm pump 9 characteristics:

1, flow spacious, through the performance is good. The maximum particle diameter allowed through is 10mm. Pumping mud, impurities, little wear on pneumatic diaphragm pump;

2. Head and flow can be adjusted stepless by valve opening (air pressure adjustment between 1-7 bar) :

3, diaphragm pump, no rotating parts and no shaft seal, such as diaphragm j | pumping medium and the moving parts of the pump, workpiece medium completely separated, the conveying medium will not leak out. So pumping toxic, easy to play or corrosive media, will not cause environmental pollution and harm personal safety;

4, do not need electricity. In flammable, explosive places to use safe and reliable.

5, no irrigation water. Suction up to 5m, head up to 50m. Outlet pressure ≥6kgf/c square meters.

6, simple structure, less wearing parts, the pump structure is simple, convenient installation and maintenance, pump transmission medium will not contact the valve, rod and other moving parts, unlike other types of pump due to rotor, piston, gear, blade and other parts of wear and tear and the performance of the gradual decline:

7, easy to use, reliable work, open and stop simply open and close the gas valve. Even if there is no medium operation for a long time due to unexpected circumstances or sudden shutdown, the diaphragm pump will not be damaged. Once overload, the pump will automatically stop, with self-protection performance, when the load is restored to normal, and can automatically start running;

8, can transport viscous liquid (viscosity below 10,000 cm) :

9, acid and alkali resistance diaphragm pump without oil lubrication, even idling. It will also have no impact on diaphragm pumps, which is the first feature of the pump.

Acid and alkali resistance pneumatic diaphragm pump characteristics-China Saiken Pumps