The use of pneumatic diaphragm pump characteristics

Common characteristics of pneumatic diaphragm pump:

1, because the air is used as the power, the flow rate is automatically adjusted with the change of back pressure (outlet resistance), which is suitable for medium and high viscosity fluids. The working point of the centrifugal pump is set on the basis of water, if it is used for fluids with slightly higher viscosity, you need to support the reducer or variable frequency governor, the cost is greatly increased, and the same is true for the gear pump.

2, pneumatic diaphragm pump in flammable and explosive environment with pneumatic pump reliable and low cost, third, the fluid will not overheat because the diaphragm pump to the fluid agitation is minimal.

3, in the harsh place of the site, such as construction sites, industrial and mining waste water discharge, due to the impurities in the sewage and complex composition, the pipeline is easy to block, so that the electric pump will form an excessive load, the motor heating is vulnerable. The pneumatic diaphragm pump can pass through the particle and the flow rate is adjustable, and automatically stops to smooth when the pipeline is blocked.

4. In addition, the pneumatic diaphragm pump is small and easy to move, does not require foundation, occupies very little ground, and is simple and economical to install. Can be used as mobile material transfer pump.

5, in the hazardous, corrosive material treatment, diaphragm pump can completely separate the material from the outside world.

6, pneumatic diaphragm pump can be used to transport chemical properties of relatively unstable fluid.

The role of pneumatic diaphragm pump in the industrial field is huge, and many difficult manual tasks can be completed by pneumatic diaphragm pump, which indirectly ensures the work safety of employees.

The use of pneumatic diaphragm pump characteristics-China Saiken Pumps